|
Post by raceygaming on Jan 28, 2013 14:04:54 GMT -5
Hey, I have some old Ogre models that were quickly and poorly painted in some of my first goes. I was wondering if people had a technique for stripping paint off both the old Pewer models or Plastic models. As I think I will need to totally re-prime the models and start over from base layering.
I am not so worried about the glue dissolving as that is an easy fix to do some regluing with Ogres but I am worried about chemicals damaging the plastic models details.
I was just wondering if there is easy way to do it as they are still prefectly good models.
Any help, tips or ideas would be greatly appreciated.
|
|
|
Post by Jack Shrapnel on Jan 28, 2013 14:08:11 GMT -5
soak them in a container with simple green (Canadian Tire and Home Hardware carry this product) for a couple of days, ensure the model is submerged into the simple green... scrub it with an old toothbrush... paint comes right off, right down to the primer... doesn't damage the plastic at all rinse them off with water and let dry before you re-prime them though
|
|
|
Post by usscott on Jan 28, 2013 18:41:57 GMT -5
one of the first things I done is to ask my safe what live of detail am I real go for in these models .If the paint on the model is thin layer to just to read do then I go of that
|
|
|
Post by raceygaming on Jan 30, 2013 13:48:52 GMT -5
Thank you very much, Simple Green sounds very useful.
|
|